Profile of the Company

    BBR Microdite Waterproofing Co. is an offshoot of  BBR Chemocraft, which was started in the year 1975 for manufacturing pH Indicators and allied products. This has been ranked on par with other multinational companies who are already in this line for the last 300 yrs. Bombay chemical market will testify to this fact. 
      The product BBR Microdite was invented 10 yrs. back by Research Scientist Bright B. Rose, Tech. Dir.  of BBR Microdite Waterproofing Co., at a time when there were unsolved leakage problems in the premises of BBR Chemocraft. Thereafter, the continued patronage by a few reputed and known builders prompted them to go for the commercial manufacture of the same so that the benefit could be extended to the whole world.
 

        Non-toxic, non-flammable aliphatic polymeric complex, compatible with cement.

The most powerful waterproofing compound, perfectly suited for using during and after construction.

Gives the maximum coverage area and durability compared to any other product in the market till date. 

Neutralizes excess Salt (NaCl) & Clay if present in the sand used for construction.

Arrests the growth of fungus thereby preventing the blackening of wall paints during rainy seasons.

Ideal for filling cracks.

Ideal additive of cement solution used for injection into concrete structures to stop leakage.

Waterproofs wall plasters thereby increasing the life of all types of interior & exterior wall paintings.

Waterproofs roofs, floors, bathrooms, toilets & water tanks permanently.

Restores deteriorated roofs & wall plasters.

Consistency in quality is maintained by computerised production control. 

When used for waterproofing of Wall plasters, this gives full protection to all types of Wall paintings during rainy seasons. This prevents the formation of hairline cracks in cement plaster & roofs. Where cracks have already appeared, this can be used to fill them and also to prevent future crack formation. 

This can be used to stop the corrosive and weakening effect of salt (NaCl) and clay if present in excess in the sand used for construction.

A special version of this product AF, arrests the growth of fungus on external walls during rainy seasons thereby preventing the blackening of wall paints if mixed with the regular versions ( SB & RF ). A pre-mixed version, AP is also available.

The treated wall surface can be coated with all types of wall paints. The paints thus coated are durable and never peel off. 

The coverage area for Walls can be from 200 to 1000 sq.ft. depending upon the nature of the wall plaster and purpose of the treatment given. For roofs it can be from 100 to 500 sq.ft. per kg. of the product depending upon the seriouness of the leakage. The cost of application per sq.ft. is very very low compared to any other product and the work can be carried out easily even with unskilled labour by simple painting using a brush or by gravitational suction.

The coverage area for Walls can be from 200 to 1000 sq.ft. depending upon the nature of the wall plaster and purpose of the treatment given. For roofs it can be from 100 to 500 sq.ft. per kg. of the product depending upon the seriouness of the leakage. The cost of application per sq.ft. is very very low compared to any other product and the work can be carried out easily even with unskilled labour by simple painting using a brush or by gravitational suction.

Places where WaterProffing needs to be done
 

Leaking brick work	Leaking old plaster	Dilapidated building	Buildings where BBR waterproofing has been done successfully

Uses of Microdite
Microdite can be best used to achieve the following results.

1) Strengthens and restores Deteriorated Wall Plaster caused by excess salt (NaCl) and clay present in the sand used for construction work. 
2) Waterproofs Wall Plasters (new and old) thereby giving protection to all types of interior and exterior paintings during monsoon. 
3) Waterproofs Concrete Roofs - horizontal & sloping. 
4) Waterproofs Cemented Water Tanks in 24 - 48 hours. 
5) Stops leakages in Bathrooms and Toilets within 12 hours without any breakage / damage to tiles.
6) Waterproofs Floorings. 
7) Arrests the growth of Fungus on wall surfaces thereby preventing the blackening of wall paints.
8) Acts as an ideal additive for the cement paste / synthetic primer used in the filling of cracks in cement structures. Microdite prevents the plugged cement / synthetic primer from undergoing any shrinkage after drying. 
9) Acts as the best additive in  Injection Grouting of cement into cement structures for unlimited durability.
10) This Waterproofs POP with astonishingly good results.
11) When this product is mixed with the water at low percentages and used for curing cement or concrete structures, waterproofing property is imparted to the treated structures.
12) Gives maximum coverage area and durability compard to any other product in the market.
13) Results are consistent as the quality of production is computer controlled.